Erlanger Hofbräu Brauerei
This stein was a “special order” for the brewery c. 1890
0,3 L. capacity and calibration incised marks
I find beauty in the simplicity of the design
Beautiful, dark patina on original pewter lid
(RZ.RM.GR) marks on base | SEE LINK and my notes in Description section
(RZ.RM.GR.) close-up on base
IDENTICAL marks inside lid as on the base of the stein (RZ.RM.GR.)
Close-up touch mark inside pewter lid. NOTE: See link in Description sec.
Erlanger Hofbräu Brauerei.
This is a 0,3 L. brewery stein made in Germany by Reinhold Merkelbach in 1890.
It is 6" to the top of the original pewter thumb-lift which is firmly attached to the handle through a 5 ring hinge.
The incised decoration is for the “Erlanger Hofbrau”.
This was a “special order” for this brewery by RM in 1890 and then discontinued.
The mold # 828 was later used for other wares.
The same model number (828) was later used to identify a decorated flask.
RM mark on stein’s base is identical to engraved RM mark on the inside of lid.
NOTE: Pewterer's touch mark on Reinhold Merkelbach #1450, dated 1902 is IDENTICAL to the pewter touch mark of my stein. There is another image on same page of a punched mark in pewter lid of featured the herring stein. (RZ.RM.GR) or Rein Zinn. Reinhold Merkelbach. Grenzhausen. This mark is again IDENTICAL to my stein.
I will provide link below for your viewing and feedback, if any? Do the (2) marks in link identical to mine provide further information?
[Link]
Stein’s ID reference page found in link below:
[Link]
The Reinhold Merkelbach Catalog Link below:
[Link]
Excellent condition, no chips, cracks, or hairlines.
Zeig alles von Jorge O. Soriano
| Form | Krug | Material | Steinzeug |
| Hersteller |
Reinhold Merkelbach Hersteller info | Modell | 828 |
| Designer/Dekorateur | |||
| Kapazität | 0,3 L. | ||
| Entwurfdatum | 1890 |
Wir sehen 2 weitere Items in unserer Datenbank mit der gleichen Formnummer und dem gleichen Hersteller:
Zeig alles von Hersteller Reinhold Merkelbach
Kommentare
Es gibt noch keine Kommentare. Einloggen um ein Kommentar ein zu geben.